|– 19 HP Kohler Command Pro EFI engine|
|– Sutorbilt 3L DSL belt-driven vacuum blower|
|– General Emperor solution pump TX1810 with electric clutch|
|– Little Giant 3HT high-pressure heater with safety relief valve|
|– 250′ black painted vacuum reel|
|– 125’ vacuum hose 2″ with connectors & vinyl cuffs|
|– 25′ vacuum hose 1.5″ with vinyl cuffs|
|– 150′ continuous high-pressure solution hose with live reel|
|– 100′ continuous supply hose with live reel|
|– 65 gl recovery tank with 2-stage filtration & automatic shut-off|
|– 55 gallon fresh water supply tank with automatic shut-off|
|– 5 gallon chemical injection container with holder|
|– 12″ 2-jet stainless steel wand|
The TCS WARRIOR console is only 16″ wide, but it has all the power you need for residential and light commercial work. Complete with a fresh water tank, triple reels, and live solution and supply hose, this truckmount package comes ready to perform right out of the box.
The open design of the TCS WARRIOR truckmount console ensures easy access to components for inspection and maintenance. Plus, with no cumbersome shrouds or covers, air can flow around components so they operate at cooler temperatures and last much longer.
The TCS WARRIOR is certified by Kohler. The EFI Command Pro engine on the WARRIOR consumes 25% less fuel than a common engine with a carburetor and comes with a 3-year manufacturer warranty.
The DSL blower motor on the TCS WARRIOR does not require grease. It turns at a 1:1 ratio to ensure maximum airflow, suction and lift. While running, the tachometer on the front of the console shows exact RPMs of the engine so you can be sure of your vacuum performance.
The HP heater with copper coils from Little Giant boasts a 120,000 BTU output which means you can reach consistent temperatures over 200 degrees in less than 60 seconds.
The TCS WARRIOR comes standard with an Emporer TX1810 pressure pump from General Pump capable of 1500 PSI (CAT 290 pump also available upon request). All TCS truckmounts come standard with an electric pump clutch for easy extraction-only operation.
The powder coated recovery tank is made of thick light-weight aluminum that is welded inside and out. Slanted bottom plate design ensures maximum wastewater evacuation.
OPTIONAL EQUIPMENT & UPGRADES
– 2000 PSI HTXS Pump & XP Heater
– Electric Vacuum Reel
– 100 Gallon Fresh Water Tank
– Additional Hoses
– Titanium Wand
– In-Line Filter
– Automatic Waste Pump (APO)
VEHICLE / TRAILER:
– Spray-In Bed Liner
– Steel Van Divider
– 3 Tier Aluminum Shelf
– LED Light Kit